The V440 is a 64-bit big-endian chip. Christer, you will have to convert
your input file or run on a little-endian system.
Jay
On Tue, Jan 17, 2012 at 11:57 AM, Christer Eriksson <agkbill_at_gmail.com>wrote:
>
> I found that Sun Fire SPARC platforms use the big-endian format to store
> and operate on their data.
>
>
>
>
>
> On Tue, Jan 17, 2012 at 5:52 PM, christer eriksson <agkbill_at_gmail.com>wrote:
>
>>
>> Hi Max,
>>
>> I am unfortunately not familiar with big-endian and little-endian.
>> How do I find out? Will google and se what I can find on V440.
>>
>> /Christer
>>
>>
>>
>>
>>
>>
>>
>> On 01/17/2012 05:47 PM, max kondel wrote:
>>
>> Hi Christer,
>>
>> Is V440 big-endian and your IC file little-endian?
>>
>> -Max
>>
>> On Tue, Jan 17, 2012 at 11:35 AM, Christer Eriksson <agkbill_at_gmail.com>wrote:
>>
>>>
>>>
>>>
>>> Dear GADGET2 users,
>>>
>>> I have been following a guide at "
>>> http://astrobites.com/2011/06/11/running-your-first-sph-simulation/" as
>>> well as instructions at "http://www.mpa-garching.mpg.de/gadget/".
>>>
>>> I never managed to get Linux up and running OK on the server, tried with
>>> Gentoo but it was always something that did not work. FreeBSD and OpenBSD
>>> on the outher hand was very easy to get up and running.
>>>
>>> I have managed to install and build GADGET2 but have problems.
>>>
>>> When I start a simulation on my SunFire V440 it looks like this:
>>>
>>>
>>> ------------------------------------------------------------------------------------------------------------
>>> [christer_at_V440 /usr/home/christer/GADGET2/SICtest]$ mpirun -np 4
>>> ./Gadget2 15/SIC_015.param
>>>
>>> This is Gadget, version `2.0'.
>>>
>>> Running on 4 processors.
>>> application called MPI_Abort(MPI_COMM_WORLD, 890) - process 0
>>> rank 0 in job 1 V440_51366 caused collective abort of all ranks
>>> exit status of rank 0: killed by signal 9
>>>
>>> Allocated 25 MByte communication buffer per processor.
>>>
>>> Communication buffer has room for 436906 particles in gravity computation
>>> Communication buffer has room for 204800 particles in density computation
>>> Communication buffer has room for 163840 particles in hydro computation
>>> Communication buffer has room for 163840 particles in domain
>>> decomposition
>>>
>>>
>>> Hubble (internal units) = 3.49333e-06
>>> G (internal units) = 1.23414
>>> UnitMass_in_g = 1.98992e+33
>>> UnitTime_in_s = 1.07793e+12
>>> UnitVelocity_in_cm_per_s = 46385.2
>>> UnitDensity_in_cgs = 1.59194e-17
>>> UnitEnergy_in_cgs = 4.28148e+42
>>>
>>> incorrect header format
>>> task 0: endrun called with an error level of 890
>>>
>>>
>>> [christer_at_V440 /usr/home/christer/GADGET2/SICtest]$
>>>
>>> ---------------------------------------------------------------------------------------------------------------
>>>
>>>
>>> Then I copy the Makefile to my Linux PC and also the SICtest/15 folder
>>> with following files:
>>>
>>> SIC_015.dat
>>> SIC_015.param-usedvalues
>>> energy.txt
>>> parameters-usedvalues
>>> SIC_015.param
>>> cpu.txt
>>> info.txt
>>> timings.txt
>>>
>>>
>>>
>>> ###############################################
>>>
>>>
>>>
>>> Now everything runs OK, starting with:
>>>
>>> [christer_at_Arch SICtest]$ mpirun -np 2 ./Gadget2 15/SIC_015.param
>>>
>>> This is Gadget, version `2.0'.
>>>
>>> Running on 2 processors.
>>>
>>> Allocated 25 MByte communication buffer per processor.
>>>
>>> Communication buffer has room for 436906 particles in gravity computation
>>> Communication buffer has room for 204800 particles in density computation
>>> Communication buffer has room for 163840 particles in hydro computation
>>> Communication buffer has room for 163840 particles in domain
>>> decomposition
>>>
>>>
>>> Hubble (internal units) = 3.49333e-06
>>> G (internal units) = 1.23414
>>> UnitMass_in_g = 1.98992e+33
>>> UnitTime_in_s = 1.07793e+12
>>> UnitVelocity_in_cm_per_s = 46385.2
>>> UnitDensity_in_cgs = 1.59194e-17
>>> UnitEnergy_in_cgs = 4.28148e+42
>>>
>>>
>>> Allocated 1.59375 MByte for particle storage. 68
>>>
>>> Allocated 1.96875 MByte for storage of SPH data. 84
>>>
>>>
>>> reading file `./15/SIC_015.dat' on task=0 (contains 32768 particles.)
>>> distributing this file to tasks 0-1
>>> Type 0 (gas): 32768 (tot= 0000032768) masstab=0
>>> Type 1 (halo): 0 (tot= 0000000000) masstab=0
>>> Type 2 (disk): 0 (tot= 0000000000) masstab=0
>>> Type 3 (bulge): 0 (tot= 0000000000) masstab=0
>>> Type 4 (stars): 0 (tot= 0000000000) masstab=0
>>> Type 5 (bndry): 0 (tot= 0000000000) masstab=0
>>>
>>> reading done.
>>> Total number of particles : 0000032768
>>>
>>> allocated 0.0762939 Mbyte for ngb search.
>>>
>>> Allocated 2.22545 MByte for BH-tree. 68
>>>
>>> domain decomposition...
>>> NTopleaves= 120
>>> work-load balance=1.00043 memory-balance=1.00043
>>> exchange of 0000016413 particles
>>> domain decomposition done.
>>> begin Peano-Hilbert order...
>>> Peano-Hilbert done.
>>> Begin Ngb-tree construction.
>>> Ngb-Tree contruction finished
>>> ngb iteration 1: need to repeat for 0000030189 particles.
>>> ngb iteration 2: need to repeat for 0000004023 particles.
>>> ngb iteration 3: need to repeat for 0000003197 particles.
>>> ngb iteration 4: need to repeat for 0000002915 particles.
>>> ngb iteration 5: need to repeat for 0000001626 particles.
>>>
>>> Setting next time for snapshot file to Time_next= 0
>>>
>>>
>>> writing snapshot file...
>>> done with snapshot.
>>>
>>> Setting next time for snapshot file to Time_next= 0.0025
>>>
>>>
>>> Begin Step 0, Time: 0, Systemstep: 0
>>> domain decomposition...
>>> NTopleaves= 120
>>> work-load balance=1.00043 memory-balance=1.00043
>>> domain decomposition done.
>>> begin Peano-Hilbert order...
>>> Peano-Hilbert done.
>>> Start force computation...
>>> Tree construction.
>>> Tree construction done.
>>> Begin tree force.
>>>
>>>
>>> ######################################
>>>
>>>
>>>
>>>
>>> Any idea why it does not work on the SUN server?
>>>
>>> All input most appreciated, would be great to get GADGET2 up and running
>>> OK.
>>>
>>>
>>> Thank you.
>>>
>>> Best reagrds,
>>> /Christer
>>>
>>>
>>> -----------------------------------------------------------
>>>
>>> If you wish to unsubscribe from this mailing, send mail to
>>> minimalist_at_MPA-Garching.MPG.de with a subject of: unsubscribe
>>> gadget-list
>>> A web-archive of this mailing list is available here:
>>> http://www.mpa-garching.mpg.de/gadget/gadget-list
>>>
>>>
>>
>>
>
>
> -----------------------------------------------------------
>
> If you wish to unsubscribe from this mailing, send mail to
> minimalist_at_MPA-Garching.MPG.de with a subject of: unsubscribe gadget-list
> A web-archive of this mailing list is available here:
> http://www.mpa-garching.mpg.de/gadget/gadget-list
>
>
Received on 2012-01-17 18:04:54