Hi all,
I tried out a few more things.
First of all:
I installed now also the public Gadget-2 version on my system and *it
works!*
It reads my IC file without problems when I compile the code with the
default Makefile (therefore also without LONGIDS).
(Thanks a lot to Matthias Kühtreiber for testing my .icl file first!)
I tried it again with Gadget-3 with the same Makefile options as in the
default Gadget-2 Makefile:
PERIODIC
UNEQUALSOFTENINGS
PEANOHILBERT
WALLCLOCK
PMGRID=128
DOUBLEPRECISION
DOUBLEPRECISION_FFTW
SYNCHRONIZATION
HAVE_HDF5
but it failed again with the same error message. The parameter files for
both tests are identical,
I only commented out a few parameter from Gadget 3 that Gadget 2 doesn't
have.
Did something change between Gadget 2 and Gadget 3 in terms of how the
IC files are read in that could be responsible for this?
Thanks everyone for helping with that!
Sylvia
On 26/11/15 14:05, Sylvia Ploeckinger wrote:
> Hi Volker,
>
> thanks for your reply! I set LONGIDS in the code and now it is
> crashing a little bit earlier.
>
> Instead of (without LONDIDs):
> task=0 blocknr=0 bytes_per_blockelement=12 npart=288018 task=0
> blocknr=2 bytes_per_blockelement=12 npart=288018 task=0 blocknr=3
> bytes_per_blockelement=4 npart=288018 task=0 blocknr=4
> bytes_per_blockelement=4 npart=0 task=0 blocknr=6
> bytes_per_blockelement=4 npart=6445 task=0 blocknr=7
> bytes_per_blockelement=4 npart=6445 I/O error (fread) on task=0 has
> occured: end of file nread = 0, nmemb = 1 fread = 0 size = 4 task 0:
> endrun called with an error level of 778
> I now get (with LONGIDs):
>
> task=0 blocknr=0 bytes_per_blockelement=12 npart=288018
> task=0 blocknr=2 bytes_per_blockelement=12 npart=288018
> task=0 blocknr=3 bytes_per_blockelement=8 npart=288018
> I/O error (fread) on task=0 has occured: end of file
> nread = 140788, nmemb = 262773
> fread = 0
> size = 8
> task 0: endrun called with an error level of 778
>
> Please find attached the complete output file for additional information.
>
> I try to set up an isolated galaxy for some tests with new cooling
> tables I am working on.
> To do that, I got the IC generator and the parameter file that a
> colleague of mine was
> using for his isolated galaxies. In his paper he says:
>
> "The initial conditions that we use are based on the model of Springel
> et al. (2005),
> and were generated using a modified version of a code that was kindly
> provided to us
> by Volker Springel."
>
> I guess that the general structure of the ICs should be alright.
> Is there a way to check whether the problem is somewhere in creating
> the ICs or with the read-in?
>
> Some more information:
> - compiler version: gcc (GCC) 4.9.2 20150212 (Red Hat 4.9.2-6)
> - compiler options for the ICs: gcc -m64 -O3
> - compiler options for the Code:
> CC = mpicc
> ifeq ($(SYSTYPE), "paracluster")
> OPTIMIZE = -g -O3 -Wall -DH5_USE_16_API
> [...]
> endif
>
> mpicc -show:
> gcc -m64 -O2 -fPIC -Wl,-z,noexecstack -I/usr/include/mpich-x86_64
> -L/usr/lib64/mpich/lib -Wl,-rpath -Wl,/usr/lib64/mpich/lib -lmpich
> -lopa -lmpl -lrt -lpthread
>
> (I also tried to set all compiler optimization to -O2 but it didn't
> change anything.)
>
>
> Sylvia
>
>
>
> On 26/11/15 11:17, Volker Springel wrote:
>> Hi Sylvia,
>>
>> Presumably you have an IC file with 64-bit IDs but use gadget with 32-bit IDs. This could be resolved by activating LONGIDS in the code. Alternatively you recreate the ICs with 32-bit IDs.
>>
>> Alternatively the IC file has an incorrect structure, but it’s hard to diagnose this without information where this file comes from.
>>
>> Volker
>>
>>
>>
>> On Nov 26, 2015, at 10:42 AM, Sylvia Ploeckinger<ploeckinger_at_strw.leidenuniv.nl> wrote:
>>
>>> Hi Michael,
>>>
>>> thanks a lot for your input!
>>> The compiler on my system should use 64bit as default,
>>> but to be sure I included the -m64 flag for both the IC generator
>>> as well as the code itself. Unfortunately it still doesn't work.
>>>
>>> Do you remember which flags you used to get it to work again after this error occurred?
>>> Was it also -m64 or did you use something else?
>>>
>>> Greets,
>>>
>>> Sylvia
>>>
>>>
>>> On 25/11/15 19:13, Michael Hansen wrote:
>>>> HI Sylvia.
>>>>
>>>> I had the same problem some while ago. Check that you are compiling both code and IC generator with or without 64 bit compatibility.
>>>>
>>>> Cheers,
>>>> Michael
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On 25 Nov 2015, at 17:32, Sylvia Ploeckinger<ploeckinger_at_strw.leidenuniv.nl> wrote:
>>>>
>>>>> Hi all,
>>>>>
>>>>> as the subject line already gives away, Gadget crashes when I try to read in an input file.
>>>>>
>>>>> The error is:
>>>>> I/O error (fread) on task=0 has occured: end of file
>>>>> task 0: endrun called with an error level of 778
>>>>>
>>>>> I found a posting in this mailing list from 2006(!) with the same error:
>>>>> http://wwwmpa.mpa-garching.mpg.de/gadget/gadget-list/0098.html
>>>>>
>>>>> but the solution seems to include some magic:
>>>>> "So, the good news is that Gadget2 runs with the LCDM gas simulation, but I don't have a clue why it didn't before!"
>>>>> (from the above posting)
>>>>>
>>>>> Did anyone else in the last 9 years have the same problem and knows how to fix it?
>>>>> I included the following extra lines in the routine my_fread to get some extra information:
>>>>> printf("nread = %zd, nmemb = %zd\n", nread, nmemb);
>>>>> printf("fread = %zd\n", fread(ptr, size, nmemb, stream));
>>>>> printf("size = %zd\n", size);
>>>>>
>>>>> and in the file read_ic.c, I included this line (as suggested by Volker in the 2006 discussion)
>>>>>
>>>>> printf("task=%d blocknr=%d bytes_per_blockelement=%d npart=%d\n",
>>>>> ThisTask, blocknr, bytes_per_blockelement, npart);
>>>>> fflush(stdout);
>>>>>
>>>>>
>>>>> Please find below the corresponding output. It comes from a one core test run, but it crashes with the same error message when I run it on 4 cores.
>>>>> The IC file seems to be okay, but is there an easy way to find out if the file is damaged to exclude this possibility?
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> Regards,
>>>>>
>>>>> Sylvia
>>>>>
>>>>>
>>>>> Allocated 129 MByte for FFT kernel(s).
>>>>>
>>>>>
>>>>> Allocated 84.4627 MByte for particle storage.
>>>>>
>>>>> Allocated 1.47507 MByte for storage of SPH data.
>>>>>
>>>>>
>>>>> reading file `/net/para35/data2/ploeckinger/IC_Gadget/output/m1e11f30.ics' on task=0 (contains 288018 particles.)
>>>>> distributing this file to tasks 0-0
>>>>> Type 0 (gas): 6445 (tot= 0000006445) masstab=5.28564e-06
>>>>> Type 1 (halo): 262773 (tot= 0000262773) masstab=2.6309e-05
>>>>> Type 2 (disk): 15040 (tot= 0000015040) masstab=5.28505e-06
>>>>> Type 3 (bulge): 3760 (tot= 0000003760) masstab=5.28505e-06
>>>>> Type 4 (stars): 0 (tot= 0000000000) masstab=0
>>>>> Type 5 (bndry): 0 (tot= 0000000000) masstab=0
>>>>>
>>>>> task=0 blocknr=0 bytes_per_blockelement=12 npart=288018
>>>>> task=0 blocknr=2 bytes_per_blockelement=12 npart=288018
>>>>> task=0 blocknr=3 bytes_per_blockelement=4 npart=288018
>>>>> task=0 blocknr=4 bytes_per_blockelement=4 npart=0
>>>>> task=0 blocknr=6 bytes_per_blockelement=4 npart=6445
>>>>> task=0 blocknr=7 bytes_per_blockelement=4 npart=6445
>>>>> I/O error (fread) on task=0 has occured: end of file
>>>>> nread = 0, nmemb = 1
>>>>> fread = 0
>>>>> size = 4
>>>>> task 0: endrun called with an error level of 778
>>>>>
>>>>>
>>>>> application called MPI_Abort(MPI_COMM_WORLD, 778) - process 0
>>>>>
>>>>> ===================================================================================
>>>>> = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
>>>>> = PID 16587 RUNNING AT para37.strw.leidenuniv.nl
>>>>> = EXIT CODE: 10
>>>>> = CLEANING UP REMAINING PROCESSES
>>>>> = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
>>>>> ===================================================================================
>>>>>
>>>>> --
>>>>> Sylvia Ploeckinger
>>>>> Sterrewacht Leiden
>>>>> The Netherlands
>>>>>
>>>>> Room Nr. 438
>>>>> email:
>>>>> ploeckinger_at_strw.leidenuniv.nl
>>>>>
>>>>> -----------------------------------------------------------
>>>>>
>>>>> If you wish to unsubscribe from this mailing, send mail to
>>>>> minimalist_at_MPA-Garching.MPG.de with a subject of: unsubscribe gadget-list
>>>>> A web-archive of this mailing list is available here:
>>>>> http://www.mpa-garching.mpg.de/gadget/gadget-list
>>> --
>>> Sylvia Ploeckinger
>>> Sterrewacht Leiden
>>> The Netherlands
>>>
>>> Room Nr. 438
>>> email:
>>> ploeckinger_at_strw.leidenuniv.nl
>>>
>>> -----------------------------------------------------------
>>>
>>> If you wish to unsubscribe from this mailing, send mail to
>>> minimalist_at_MPA-Garching.MPG.de with a subject of: unsubscribe gadget-list
>>> A web-archive of this mailing list is available here:
>>> http://www.mpa-garching.mpg.de/gadget/gadget-list
>>
>>
>> -----------------------------------------------------------
>>
>> If you wish to unsubscribe from this mailing, send mail to
>> minimalist_at_MPA-Garching.MPG.de with a subject of: unsubscribe gadget-list
>> A web-archive of this mailing list is available here:
>> http://www.mpa-garching.mpg.de/gadget/gadget-list
>
> --
> Sylvia Ploeckinger
> Sterrewacht Leiden
> The Netherlands
>
> Room Nr. 438
> email:ploeckinger_at_strw.leidenuniv.nl
--
Sylvia Ploeckinger
Sterrewacht Leiden
The Netherlands
Room Nr. 438
email: ploeckinger_at_strw.leidenuniv.nl
Received on 2015-11-26 16:14:18